






As I've been contemplating other bigger projects and deciding where to start, I've been working on smaller things. I finished these two this week. Technically, the St. Paul's on the bottom isn't finished because I need to make it into an ornament, but the cross stitching is done. The top is the commemorative needlebook kit we received at Plimoth Plantation last week (see previous post). Isn't Wendy White's design lovely? And I really enjoyed working with the perforated paper card. I have an extra special bit on my needlebook. I saved the ends of the gold wrapped silk I was using on the jacket and made the top pink flower on each side with it.
We also had our show and tell time. It was wonderful to see everyone's work. I have so many ideas for things to make - as always I'll write them down or I will forget them before I ever get the chance to work on them.
Later in the day, Jill Hall took us to the wardrobe workshop and showed us where they clothe the 50-60 English settler interpreters at Plimoth Plantation. There is a separate wardrobe department for the Native People who wear Wampanoag dress.
So here is my completed underarm piece. As you can see, three days of stitching doesn't cover much ground when you are working with detached buttonhole and getting used to a floor frame. Mind you I did take breaks and had time off for meals and shopping. I imagine the women who made these jackets back in the 16th and 17th centuries didn't have so much time off and I know their meals weren't as nice as the ones we had.
I can't tell you how exciting it was to talk with Tricia Wilson Nguyen about the project. She is very excited by all the technical details and knowledgeable about the threads. It was fascinating to hear about how she researched the threads used and how she was able to get gold wrapped thread for the project. And the gold wrapped thread was great fun to work with. The two pink strawberries are done with the carnation colour.
Everyone at Plimoth Plantation was great. Jill and her staff in the Colonial Wardrobe Department (and Jill's two lovely daughters) did so much for us. And all the other stitchers were so nice and it was inspiring to hear about all their projects and the classes they had taken. I realized that despite my many years of stitching, I really am just a neophyte when it comes to real historical stitching. A few reproduction samplers is nothing compared to the work many of the other participants are doing. It was a real learning experience all around.

This was so much fun! I started thinking I'd do a pink flower but the first petal reminded me of a worm so I went with it. In keeping with my personal challenge, the dirt, beak and bird feathers are also cast on stitch. The eye is a French knot.
I did another sort of experimental (at least for me) sampler this time on a piece of felt I made recently. It was very interesting to see the way the different colours worked on the different backgrounds. This piece has the highest form of compliment - my daughters like it! And I had fun which is even better.
And here is the final pillow. My first CQ project is done! As well as having help from Sharon's TAST challenges, I had help and encouragement from ktj in pa who sent me patterns and encouraged me to try crazy quilting.

I don't know how long or how far I'll go with this, but I'm pleased that I pushed myself to get out and do something active, it has been good to know I can do it, and I'm very happy I found the time. I highly recommend trying something new to everyone!
I had limited stitching time last week because of work, so I did a very small sheaf stitch practice before using it on my CQ block. I was glad I did because I tested different spacing, both of the uprights in the single stitch, and the spaces between stitches. When I tested the beads with the stitch, I realized that I had to give extra space between stitches to make sure the beads had space. Once again, I've learned the value of testing on a doodle cloth before stitching on the actual piece. You'd think after all these years I'd have learned that but I've always had the mistaken belief it would waste time, when really the time waster is pulling out stitches that don't work because they haven't been practiced.
I added blue beads to the gold Basque stitch and charms to the Chevron.
I'm still not sure about the light blue ribbon seam. I've added gold spacers in two different sizes but it still isn't right. I'm thinking of weaving some silver filament thread through the ribbon. We'll see.
Here is the whole block as of last night. I'm not sure if you can tell, but I've padded the dragon to make it stand out. I'm thinking of the best way to ground him, since right now he is just floating there. We looked at crystals for him to have his front paw on, but there was some disagreement about the size yesterday, so next time we are at the craft store I'll take the block so we are sure of the size. The last seam is in the bottom left and so far no inspiration. Any suggestions are welcome!
As I thought about the bullion stitch, I wondered if you could use it to make something that looked like cording, so I used some gold to try and get the look. I started without enough of an angle, but I think the top bar of gold comes close. Then I played around with flower forms, then I wondered if I could make upright loops. The blue loops have over 20 turns of thread around them. I had to try fuzzy white crewel wool in raised loops to make a sheep, and I thought smaller loops, some raised, would make a nice grass or moss look. My final trial was a braid, which was fun, and I really like it so I'll use if for one of the seams on the dragon CQ block below, although in different colours.
This has been a quiet week so I've had time to finish my small beaded turtle pond picture. Luckily I decided to check how the frame edges fit before I was done and discovered that I had somehow misjudged the width, so I had to take out a couple of cattails and some tiny gold beads. At least I knew how far to go with the blue beads in the water.

Well, I finally did it, I tried making felt. We had some roving from a needlefelting kit, and since the kids just wanted to make dogs, I decided to use the other colours to make felt. The photo above is the front (or at least the side I decided to use) and the photo below the back, which is also quite nice. It was a fun experience and my younger daughter also tried her hand at is and enjoyed it as well. Of course our pieces are only about 4" x 5" so they are only useful for so much. And they aren't thick or strong. We'll continue working but in the meantime, I had a new medium for my TAST practice.
Here is what I have done with the half chevron, including two beaded curves, also something new for me. I'm very pleased with this since this type of embroidery is such a new thing to me. It was very nice working with the cotton floss on wool felt, and the beads weren't as tedious as I expected. I just sort of followed the shapes in the felt and tried not to make the colours clash. All in all, a very fun experience.
In my stumpwork projects I often use long and short, or at least a reasonable approximation, for shading and filling petals and leaves and such. So I thought I'd try doing counted long and short to get a real feel for the stitch. I also wanted to experiment with colours and shading so I made a rainbow band of sorts. I had a harder time than I expected getting four shades of the same sort of colour, I guess that means I need to add to my stash:-) But it was very interesting to see how the shades worked together or in some cases didn't - although I guess it would depend on the look you were going for. The small red sample is done with 2 strands of overdyed silk. I love this colour and I love the way the shading works. It would be quite different with satin stitch covering the same area so I can see the use for this stitch with overdyed threads as well.
Back at TAST22 Satin Stitch I showed a leaf and some petals that I was working on for a new stumpwork project. It all started out with my trying to figure out what I could do with Altoid tins, other than a tiny sewing kit, since I've become very fond of the chocolate coated Altoids and have a few tins lying around. I came up with the idea of making a book, sort of. The outside shown above is supposed to look a bit like a book, complete with gilt page edges. Instead of pages inside, I have put a stumpwork Virginia rose.
In my new spirit of creating for art's sake, this piece has no purpose and will not be a gift. I am just going to enjoy it.
I would love to hear from others who have done stitched things with Altoid tins (since I have more). I did do an online search and found all sorts of things, but most weren't stitched and I really don't want an Altoid tin mouse for my computer or an Altoid tin wallet! I am also interested in how you stick things to the tin. I have used double sided tape and some Heat n' Bond for my projects so far because I hate liquid glue.
Even though Sharon gave us leave to mix French knots with other TAST stitches, my personal challenge is to try and use only the stitch of the week with maybe a bit of another stitch. I've used French knots in many things, especially since they are quite useful when doing flowers. This week I decided to try French knots with as many types of yarn as I could find, and with different numbers of strands. I've used tapestry wool, DMC cotton floss, DMC linen floss, rayon floss, silk, silk ribbon, and Krenick braid and blending filament. I learned alot. Using blending filament (4 strands) to make a French knot is like trying to herd cats. Silk ribbon doesn't make a French knot different enough to make it necessary to use ribbon. Rayon is almost as bad a blending filament. And as always, I love silk!!!
I'm afraid after my excitement over the Plimoth Jacket project sample that I wanted to mail off as soon as possible, I had little energy left for wheatear samples, but I did manage a nice row of strawberries. The funniest thing about the wheatear, after seeing the amazing things people have done with it, is the comment in Donna Kooler's Encyclopedia of Needlework "Works best in straight rows, but may handle gentle curves."
This is what occupied my time, the stitch sample I'm sending off to Plimoth Plantation in hopes of participating in their jacket project. My favourites, which ktj concurs with, are the Ceylon stitch worm and the Spiral Trellis circle. The bottom sample is not in my test sample below, it is Detached Buttonhole Needlelace. The bottom right section lifts up.